This is an alternative to the J1772™ Adapter Box. It has the same specs, switch and LED as the J1772™ Adapter Box but without the 4x4x2 Cantex Box. The Pilot Signal generator is in a seperate box on an 18″ cord so that the Inlet can be installed in the ‘gas cap’ area and the switch in another location. All pin connections are crimped to Military Specs.
A template is enclosed for installation –
Installation is simple –
- Holes are drilled for the J1772™ Plug using a supplied Template.
- Then the Pilot Box hole is made by filing out the template of the Template for Pilot Box which is superimposed over the J1772™ Plug.
- The 4 hex bolts and nuts are removed from the 4 holes holding the Plug and Strain Relief together, DO NOT seperate the Plug and Strain Relief housing.
- Once the Template is drilled and filled to size, pigtail is put thru the hole and then the Pilot box is put thru and the Inlet is then screwed into place using the 4 hex bolts and nuts.
- The Pilot Box can be attached in an appropiate location in the trunk and the 10AWG cord is attached to the charger (8AWG available upon request).
Price is $165, plus shipping –