Please note that an Industrial type crimper is needed to crimp the wires into the pins.
– Inlet alone, with pins for 2 power wires, L and N, 1 ground and 2 sense wires.
– The L, N and ground Pins can take up to a 6AWG wire, the 2 sense pin can take up to 18AWG
– Rated at 50 amps
– Strain Relief on back with PG29 Cable Gland
While most of the the EVSE’s, EV’s etc don’t care if the L and N are respect for 120VAC, some do so it is better to keep them connected correctly.